Projekt · Dnr 2021-04305 · Källa: Vinnova

Studie av reaktion och porositetsbildning mellan keramisk kärna och Haynes 282

Koordinator
TPC Components AB
Projekttid
2021-11-15 till 2022-12-16 (avslutat)
Beviljat bidrag
325 000 SEK
Diarienummer
2021-04305

Beskrivning

This project aims to investigate the core-metal reaction and porosity in cast Haynes 282 component using alternative core materials or core coatings. Because the results of this project were mostly inconclusive it is suggested that further investigation is required. It is inconclusive if microporosity formation is affected by the choice of core material. There is a tendency that parts casted with cores coated with alumina to present more severe micro-porosity problems. Reaction surface layers were observed only in parts the underwent HIP or heat-treatment. This indicates that the core material plays no role in the formation of a reaction layer. It is theorized that the parts were exposed to atmospheric oxygen and nitrogen during HIP or Heat-treatment resulting in the formation of an oxide-nitride layer on the surface of the castings.

Öppna hos Vinnova

Hittar Vinnova inte sidan? Sök på diarienumret hos Vinnova.

Liknande

  1. ALTOS - ALuminium Two O five Structures

    GKN Aerospace Sweden AB · 2019-11-05 · 4 500 000 SEK · Projekt

    The project set-out to answer the following three important questions: 1.Will the casting process give sufficient fatigue properties for the alloy to become an alternative for commercial jet engine components? 2.Can all steps in the heat treatment process be modelled with the view of improving compo…

  2. Förberedelseprojekt för MAZEC

    Luleå tekniska universitet · 2025-06-30 · 300 000 SEK · Projekt

    MAZEC was a three-month planning initiative to prepare a Horizon Europe proposal on mechanochemical activation of recycled concrete. A Stage-1 application was successfully submitted in September 2025. The consortium consisted of 18 institutions, with 7 industrial partners, including organisations fr…

  3. A paradigm shift in thin film growth by magnetron sputtering: towards metal-ion-controlled process

    Linköpings universitet · 2020-01-13 · 500 000 SEK · Projekt

    Projektet syftade till att utveckla nya processer för högkvalitativa beläggningar vid lägre substrattemperaturer. Detta innebär en paradigmskifte i tunnfilmstillväxt genom att ersätta traditionellt använt gasjonbestrålning med metalljoner. Vi visade att massan av infallande metalljoner spelar en avg…

  4. High-resolution characterisation of secondary carbide precipitation in martensitic steels

    Swerim AB · 2018-11-26 · 500 000 SEK · Projekt

    Mikro-till-nanostrukturen i kommersiella stål är komplex med förekomst av lokala avvikelser. Strukturen är samtidigt direkt avgörande för materialets egenskaper likt hårdhet och styrka. Mer traditionella mätmetoder likt TEM och APT analyserar en mer lokal provvolym och gör det svårt att erhålla en f…

  5. Design av en högpresterande amorf legering för additiv tillverkning

    QuesTek Europe AB · 2018-06-01 · 2 712 139 SEK · Projekt

    Project aim was to establish a comp. framework and strategies to enable printing of Fe-BMGs, to address an industrial need for alloys having unique combination of properties at reasonable cost. By identifying and addressing key technical challenges, ICME modeling was used to design new alloys and ca…